New construction · Glen Ridge

New construction roofing in Glen Ridge, FL

Only 3 percent of homes in Glen Ridge were built in 2010 or later, so new roofing here usually means one of a few new homes or a rebuild. The town is small, with about 100 housing units, and a new roof on a new house goes through the same permit steps as any Florida build. Here is how those steps apply in Glen Ridge.

Request a quote 407-242-2840

Updated October 2026

A roof deck sheathed in red-brown ZIP System panels with black seam tape, a bucket and a ladder on the deck, homes and a street behind.

Glen Ridge figures this page uses

Housing units (ACS 5-year): 100
Median year homes were built: 1959
Share of homes built 2010 or later: 3%
People (2020 Census): 217

Local context

What new roofing work looks like in Glen Ridge

Most of the 100 housing units in Glen Ridge were built long before 2010. The median home dates to 1959, so a new roof here most often sits on a new build or a full tear-off of an older house. That kind of job is handled as new construction in the permit file, not as a simple repair.

The town is small enough that single-family detached homes make up nearly all of the stock. Nearly every new roof will be a pitched roof on a house, which keeps the scope narrower than a multifamily job.

Permits and rules

Permits, code edition and product approval for a new roof

Permit applications and plans submitted on or after December 31, 2026 must follow the Ninth Edition of the Florida Building Code. Applications filed before that date stay under the Eighth Edition, which took effect December 31, 2023. Ask the Town of Glen Ridge Building Division which edition your file falls under before you sign a contract.

Statewide product approval requires that roofing be classed as a mandatory category. Check the Florida Building Commission product approval search for the FL number on any shingle, tile or metal panel your roofer proposes. Palm Beach County is not in the High Velocity Hurricane Zone, so Notice of Acceptance rules for Miami-Dade and Broward do not drive the choice here.

Confirm the Eighth or Ninth Edition with the Glen Ridge Building Division.
Match each product to its approval number before the permit is filed.
Keep the approval numbers with the plans for the inspector.

Schedule and inspections

Plan the roof alongside the build and the inspections that follow it

Florida code lists the roof inspections in order. Framing has to be finished before the sheathing inspection, and the roofing inspection covers the dry-in, insulation, roof coverings and flashing. Plan the roofing crew around those inspection points so the roof is not waiting on a sign-off.

The sheathing must be fastened with ring shank nails, and the dry-in must use one of three approved underlayment options. Shingle roofs need drip edge fastened at a set spacing that tightens where wind speeds are higher. Ask your roofer which dry-in option the permit calls for.

Request a bid

Questions

New construction roofing in Glen Ridge: questions

Do new Glen Ridge roofs have to meet the Ninth Edition of the Florida Building Code?

That rule applies solely to applications filed on or after December 31, 2026. The Ninth Edition becomes effective on that date, and all applications and plans filed on or after it must comply. Applications filed before that date fall under the Eighth Edition, which took effect December 31, 2023. Confirm which edition your file uses with the Town of Glen Ridge Building Division before you finalize plans.

Source: Miami-Dade County RER notice, read Oct 5, 2026

Related: New construction roofing

Does a new roof in Glen Ridge need a Florida product approval number?

Roofing is a mandatory category for statewide approval under Florida law. Look up the FL number of each shingle, tile or metal panel in the Florida Building Commission product approval search. Palm Beach County is not in the High Velocity Hurricane Zone, so the rules that apply to Miami-Dade and Broward do not decide this for Glen Ridge.

Source: Florida Statutes, section 553.842 (2026), read Oct 5, 2026

Related: New construction roofing

Who can install a new roof on a new house in Glen Ridge?

A builder may install asphalt shingles on a new building it constructed itself. Contractors holding a certification or registration must perform the installation of tile, metal and membrane roofs. A general contractor may not advertise as a roofer unless it holds that certification or registration. Ask to see the license for whoever does the roof work. Glen Ridge is a small community, and the census counted 217 people there in 2020, so many homeowners know their neighbors' roofers personally, which makes checking credentials for every job worth doing.

Source: Florida Statutes, section 489.113 (2026), read Oct 5, 2026

Related: New construction roofing

Does a new house in Glen Ridge get a builder warranty on the roof?

Florida requires builders to warrant newly constructed homes for one year against defects in equipment, material or workmanship that violate the Florida Building Code. Counting begins at whichever comes earlier: original conveyance or first occupancy. Normal wear and tear, settling, defects the owner causes and natural disasters fall outside the statute's coverage. Glen Ridge is a small community, with 217 people counted in the 2020 Census. Your builder or the Florida Building Commission can confirm how the rule applies to your home.

Source: Florida Statutes, section 553.837 (2026), read Oct 5, 2026

Related: New construction roofing

Nearby